Insta360 has introduced the Mic Pro, a wireless microphone system designed for creators, filmmakers, podcasters, and event professionals. Mic Pro integrates a three-microphone array, onboard recording, and AI processing to support flexible audio capture across different production environments.
It functions both as a live wireless microphone system and as a backup recorder on each transmitter. The system also supports scalable multi-channel setups and cross-device compatibility for cameras, smartphones, and professional recording workflows.
Key Features: Insta360 Mic Pro
- Customizable E-Ink display for transmitter identification (names, logos, roles)
- Three-microphone array with DSP-based polar pattern switching
- Omnidirectional, cardioid, and figure-8 recording modes
- AI noise cancellation powered by onboard NPU
- 32-bit float recording with wide dynamic range and recovery from audio peaks
- 32GB internal storage per transmitter for independent backup recording
- Auto file segmentation every 30 minutes for long recordings
- Stereo recording mode for ambient and spatial audio capture
- Auto Gain Control with Prevent Clipping (Auto) and Dynamic modes
- Expandable system: up to 4 transmitters per receiver or multi-receiver setups
- Timecode sync via TCXO oscillator with less than one frame drift over 24 hours
- Connectivity via USB-C, Lightning, 3.5mm, and Bluetooth (Insta360 cameras)
- Up to 10 hours battery life per transmitter and 30 hours with charging case
- 5-minute fast charging provides up to 1 hour of recording
The E-Ink display provides a persistent visual identity for each transmitter, remaining visible even when powered off. It is optimized for outdoor and high-brightness environments and only consumes power during refresh cycles, improving efficiency during extended use.
The three-microphone system replaces fixed-pattern wireless capture by enabling software-controlled switching between pickup modes. This allows a single transmitter to adapt to different recording scenarios such as dialogue, interviews, and ambient capture without changing hardware.
Quick Specs: Insta360 Mic Pro
Transmitter
Dimensions: 38 × 12.2 mm
Weight: 19.7 g (no clip)
Display: 1.22″ 6-color E-Ink (240 × 208, 197 PPI)
Wireless: GFSK 1/2 Mbps
Bluetooth: 5.4 (2.4–2.4835 GHz), ≤20 dBm
Battery: 240 mAh (3.89 V, 0.94 Wh)
Charging: 5V max
Charge time: ~1 hr (80% ~24 min)
Fast charge: 5 min ≈ 1.5 hr use
Operating time: up to 10 hr
Storage: 32 GB
Internal recording: 24-bit mono 60 hr, 24-bit stereo 29.7 hr, 32-bit mono 44.8 hr, 32-bit stereo 22.2 hr
Temp: -10℃ to 45℃ (charge 0℃ to 45℃)
Receiver
Dimensions: 55.8 × 27.65 × 21 mm
Weight: 29.8 g
Wireless: GFSK 1/2 Mbps
Bluetooth: 5.4 (2.4–2.4835 GHz), ≤20 dBm
Battery: 410 mAh (3.89 V, 1.60 Wh)
Charge time: ~75 min (80% ~27 min)
Fast charge: 5 min ≈ 1.5 hr use
Operating time: up to 11 hr
Temp: -10℃ to 45℃ (charge 0℃ to 45℃)
Charging Case
Size: 122 × 61.9 × 42.2 mm
Weight: 174 g
Battery: 2815 mAh (10.951 Wh, 3.89 V)
Charge time: ~2 hr
Total runtime: up to 30 hr (2 TX + 1 RX)
Cycles: ~2 full charges (2 TX + 1 RX)
Temp: -10℃ to 45℃ (charge 0℃ to 45℃)
Audio & System
Patterns: Omni / Super-directional / Cardioid / Figure-8
Frequency: 20 Hz–20 kHz (low cut off), 100 Hz–20 kHz (low cut on)
Sample rate: 48 kHz
Bit depth: 24-bit / 32-bit float (TX internal only)
SNR: 72 dB (A-weighted)
Max SPL: 130 dB SPL @10% THD
Sensitivity: -38 ±1 dBV @1 kHz, 94 dB SPL
Noise: 22 dB (A-weighted)
3.5 mm input: -8 dBV max
Output: 20 mW @32 Ω
Range: up to 400 m (open field)
Timecode
Frame rates: 23.98 / 24 / 25 / 29.97 / 30 / 50 / 60 fps variants
Drift: <1 frame / 24 hr
Input: LTC (3.5 mm TRS)
Output: LTC / Audio-TC (3.5 mm TRS, USB-C)
Pricing and Availability
Insta360 Mic Pro is available globally starting at USD 329.99 (Rs. 31,810 approx.) for the 2 TX + 1 RX kit. It is available via the Insta360 official store, Amazon, and authorized retail partners worldwide.